中文 English

PVC板
油壓切片機
 

   
AIR-OIL PRESS
AP3000 設計圖
特性
Character:

    採用內藏式專利型、增壓缸。

    防滑設計、保證安全穩定、深淺調整簡單方便。

    迷你、輕巧、不佔空間、搬運方便。

    最大工作高度、行程可依客戶要求訂製。

    價格低廉、沖力大。

    模具、治具均可接受訂單。

    Concealed-patent type increase pressure cylinder is used.

    Designed for slide-proof, ensured in safety and stability, simple and convenience in heavy-light adjustment.

   Mini, delicate, non-space, easy to move.

    Max. work height and stroke manufactured as customer´s requirement.

    Low price, high impulse.

    Mold device and fixed device are acceptable to order.

DIE OIL PRESS
SUP-2T~25T 設計圖
特性
Character:

    以油壓為動力源,壓力大,線速度穩定,耐操,故障率低。

    採寬柱式設計,機械剛性強,加工穩定。

    SUP型採三層模式設計,機械剛性強,加工穩定平行精度0.02m/m

內價格較大沖床便宜數倍。

    動作行程大,可全程高推力或選擇未負載低壓,負載時高壓作動。

    安全設定周全,採雙按開關啟動,+緊急停止鈕,+下降停止時間調整(time),+自動、手動(調模)電路設計,並且有上下極限開關,可作為行程調整。

    Oil power, high pressure, stable liner speed, endurant, low trouble.

    Designed for wide-column, strong mechanical rigidity, stable in processing.

    Three layers mode for SUP type, strong mechanical rigidity, and stable in processing

that parallel precision is within 0.02m/m, the price is lower than big punching machine to several times.

    Large stroke, high thrust entire stroke or low pressure unload and higher pressure when load.

    Comprehensive safety instrument, double button swith on,emergency button,down stop time adjustment,automatic, hand(mode adjustment) circuit design, and there are upper and lower limit switches to adjust stroke.

 

FOUR-COLUMN TYPE OIL PRESS
SP-1T~20T 設計圖
特性
Character:

    以油壓為動力源,壓力大,線速度穩定,耐操,故障率低。

    採寬柱式設計,機械剛性強,加工穩定。

    SUP型採三層模式設計,機械剛性強,加工穩定平行精度0.02m/m

內價格較大沖床便宜數倍。

    動作行程大,可全程高推力或選擇未負載低壓,負載時高壓作動。

    安全設定周全,採雙按開關啟動,+緊急停止鈕,+下降停止時間調整(time),+自動、手動(調模)電路設計,並且有上下極限開關,可作為行程調整。

    Oil power, high pressure, stable liner speed, endurant, low trouble.

    Designed for wide-column, strong mechanical rigidity, stable in processing.

    Three layers mode for SUP type, strong mechanical rigidity, and stable in processing

that parallel precision is within 0.02m/m, the price is lower than big punching machine to several times.

    Large stroke, high thrust entire stroke or low pressure unload and higher pressure when load.

    Comprehensive safety instrument, double button swith on,emergency button,down stop time adjustment,automatic, hand(mode adjustment) circuit design, and there are upper and lower limit switches to adjust stroke.

 


華鈿企業有限公司享有著作權,禁止侵害,違者必究。
HWA TYAN ENTERPRISE CO., LTD
地址:桃園市玉山街233巷57號
FACTORY:NO. 57, LANE 233, YUH SHAN STREET, TAOYUAN, TAIWAN, R. O. C.
TEL:(03)3625735  FAX:(03)3635027
行動:0932091232
E-mail:hwatyan@mail.ebm.com.tw

網頁設計維護:大山科技網頁設計公司

專營PVC板,切片機,電路板切片機,PCB切片機,桌上沖床,氣壓沖床,油壓沖床,空壓壓床,手壓機,桌上型沖床,沖床,工作母機。